Chemical Engineering Project Topics & Materials In PDF, Doc.

1. PRODUCTION OF CRUDE OIL- DRILLING PROCESS

» ABSTRACT The tremendous (large) demand of some petroleum fractions in our modern world today has drive some professionals (experts) in oil sectors into exploration and drilling operation which is aimed at locating the mineral oil deposit and extracting it from beneath the earth surface with aid of some vital exploration techniques and drilling machine (ng) on which drill ...Continue Reading »

Item Type: Project Material | 65 pages | 12,909 engagements |

2. CONSTRUCTION OF SOAP MOULDS, TABLE AND CUTTERS

» ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary production level. Referring to the project, the aim is for the establishment o...Continue Reading »

Item Type: Project Material | 65 pages | 7,648 engagements |

3. ALTERNATIVE RAW MATERIAL SOURCES FOR CEMENT PRODUCTION

» ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process wet semi wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring down the cost of cement by investigating into alt...Continue Reading »

Item Type: Project Material | 65 pages | 7,985 engagements |

4. PRODUCTION AND CHARACTERIZATION OF SOFT SOAP FROM LOCAL POTASH (NGU) OR CAUSTIC ...

» ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil (pKo) caustic soda and soda ash. Other additives are perfume, coaming agent, sodium tripotiphosphate (STPP), colour, ptenus, glycerine, sodium silicate and pac R or sta...Continue Reading »

Item Type: Project Material | 65 pages | 6,522 engagements |

5. PRODUCTION OF SLOW BURNING CANDLE

» ABSTRACT The project was carried out to produce slow burning candle for domestic uses. The project was carried out using the following apparatus; Reactor [20 litres in volume], bussen, Beaker (400ml) and wick. The chemical/raw material used in the production are wax, wick, cathyl alcohol, white colourant and steanic acid. The ...Continue Reading »

Item Type: Project Material | 65 pages | 5,934 engagements |

6. THE RATE OF ADSORPTION OF PALM OIL WITH BITUMINOUS COAL

» ABSTRACT This project was carried out using bituminous coal (non activated) and the degree of refining of palm oil at different temperature and time using spectrophotometer. This was carried out to check the effectiveness of bituminous coal sample (bleaching earth) as a bleaching agent for palm oil. The coal (bituminous coal) was collected in lump forms, it was air dried to remove any moisture ...Continue Reading »

Item Type: Project Material | 65 pages | 4,726 engagements |

7. THE POTENTIALS FOR A CO-OPERATIVE THRIFT CREDIT SOCIETY IN A HIGHER EDUCATION IN...

» TABLE OF CONTENTS CHAPTER ONE 1.1 Background of the study/Introduction 1.2 Statement of Problem 1.3 Purpose of the Study 1.4 Scope of the Study 1.5 Significance of the Study 1.6 Definition of Term 1.7 Research Questions. CHAPTER TWO 2.1 Review of Related Literature, ...Continue Reading »

Item Type: Project Material | 65 pages | 4,976 engagements |

8. THE EFFECTS OF THE ACTION OF DETERGENT AND SOAP ON SOIL/DIRTY SUBSTANCE DURING W...

» ABSTRACT This seminar was carried out with the sole aim of knowing the effects of the action of soap and detergent on soil/dirty substance during washing. It was found out that soap and detergent are water – soluble sodium or potassium salt of fatly acids respectively which enhance the cleansing action of water in solution. They cleans by acting as an emulsifier. Basically allow soil and wat...Continue Reading »

Item Type: Project Material | 30 pages | 6,204 engagements |

9. THE EFFECT OF STORAGE ON UNREFINED VEGETABLE OIL

» ABSTRACT This research work was aimed at determining the effect of storage on unrefined vegetable oil. In the course of this research work, palm oil was used as a sample to determined the effect of storage to unrefined vegetable oil. A storage on interest was developed on this research work to have a standard knowledge on the storage problems of palm oil in particulars when not refined. In the ...Continue Reading »

Item Type: Project Material | 65 pages | 5,295 engagements |

10. THE CONSTRUCTION OF SIEVE ANALYSIS EQUIPMENT

» ABSTRACT The sets of seizes with shaker which was fabricated and assembled in the Chemical Engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles, besides, this, it was also fabricated sizes or diameter of the solid particles of a substances by allowed it pass through the pores or a partures of the s...Continue Reading »

Item Type: Project Material | 65 pages | 5,752 engagements |

11. SELECTION OF LUBRICATING OILS FOR VARIED ENGINE PERFORMANCE

» ABSTRACT The topic of this project is the “selection of lubricating oils for varied engines performance”. The aim is to specify the adequate lubricating oils for different engines. Using some equipment like hydrometer, flash point tester, and visometer, the proportion of lubricating oils like specific gravity, flash point and viscosity were found. These analysis were carr...Continue Reading »

Item Type: Project Material | 65 pages | 5,233 engagements |

12. SOLID WASTE SEPARATION AND UTILIZATION

» ABSTRACT This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in order to reduce the impact on the environment – environmental degradation. In this work, effort was made to point out the required steps taken in solid waste management. Segregation at the source was done to get either the vegetable waste separated from th...Continue Reading »

Item Type: Project Material | 65 pages | 5,907 engagements |

13. THE EFFECT OF ENVIRONMENT ON CORROSION

» ABSTRACT In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail. Six of each type while the other not coated. The research was carried out in the physical chemical laboratory of the institute of management and technology. The environments u...Continue Reading »

Item Type: Project Material | 65 pages | 7,196 engagements |

14. WATER PURIFICATION UNIT

» ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no chemical engineering operation, but a physical separa...Continue Reading »

Item Type: Project Material | 65 pages | 7,421 engagements |

15. CONSTRUCTION OF VENTURIMETER

» ABSTRACT The project was on the construction of a venturimeter. Venturimeter being a measuring instruction was used in determining the flow rate of fluid down a pipe or the rate of discharge in a pipeline and is often fixed permanently at different sections of the piple line to know the discharge there. The research was made possible by the consultation of the internet, textbooks, and relevant ...Continue Reading »

Item Type: Project Material | 65 pages | 5,840 engagements |

16. THE REFURBISHMENT OF TEMPERATE CONTROL APPARATUS

» ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the equipment especially in the sump where leakages were observed. In the repair, the water in the sump was drained off, corrosion and rusting in the tank were scraped off, the sump was washed and allowed to dry. A homogenous mixture of crown filler and...Continue Reading »

Item Type: Project Material | 65 pages | 4,725 engagements |

17. SAFETY CONCERN IN LIQUEFIED PETROLEUM GAB ENVIRONMENT

» ABSTRACT This research work which is based on safety principles and practice in liquefied petroleum gas (LPG) environment. LPG which is a petroleum fraction produced by distillation of crude oil. It is a hugely versatile gas found over many million of years beneath the ground and it is obtaining from processing of natural gas and refining of crude oil LPG is either prepare and instance which ...Continue Reading »

Item Type: Project Material | 65 pages | 5,195 engagements |

18. PRODUCTION OF HIGH QUALITY FOAM

» ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di Iso cyanate, methylane chloride (MC) (CH2CL). Silicon oil, stannous octoate, calcum carbonate and water. As a result of chemistry of polyurethane foa...Continue Reading »

Item Type: Project Material | 65 pages | 7,822 engagements |

19. CONSTRUCTION OF PORTABLE WHEEL - BARROW

» ABSTRACT After detailed study on machines and levers, the construction work started as follows: Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out are located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its dimensions. However, brief dimensions are given ...Continue Reading »

Item Type: Project Material | 65 pages | 4,966 engagements |

20. DEVELOPMENT OF AEROSOL INSECTICIDE USING LOCAL RAW MATERIALS

» ABSTRACT This research work was carried out on the development of aerosol insecticide using local raw material. This was made possible through careful and through review of some organic substances to obtain their various properties and characteristic under various conditions. The following promised to be active in the formulation of a biodegradable aerosol insecticide which is non toxic and capabl...Continue Reading »

Item Type: Project Material | 65 pages | 6,679 engagements |

21. CONSTRUCTION OF STEEL - SHELF

» ABSTRACT The steel shelf was constructed at the mechanical Engineering workshop of the Institute. The first step taken in the fabrication of the shelf was the selection of the material suitable for the construction; mild steel was chosen. The construction has the following steps: drawing and dimensioning of the proposed steel – shelf, market surveying and procurement of the needed materials,...Continue Reading »

Item Type: Project Material | 50 pages | 5,159 engagements |

22. AN EMISSION INVENTORY OF POLLUTANTS

» ABSTRACT Pollutant emissions in Enugu urban are generally from the combustion of petroleum products and to a negligible extent, solid waste disposal by open burning. The quantity of petroleum products consumed within Enugu urban was obtained in the spot” from the functional fuel stations in the area. The results showed that ...Continue Reading »

Item Type: Project Material | 65 pages | 4,713 engagements |

23. CONSTRUCTION OF READING TABLE AND A CHAIR

» ABSTRACT The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipment etc. However, before the construction of the table, selection of wooden materials were ca...Continue Reading »

Item Type: Project Material | 65 pages | 5,723 engagements |

24. WEB BASED LEGAL PRACTITIONER APPLICATION SYSTEM

» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY To understand the web based legal practitioner application system, it includes not merely the profession, which is practiced in courts but also covers law teaching, law research, administration in different branches where law plays a role and in fact, commercial and industrial employment and all other activities, which postulates and requires...Continue Reading »

Item Type: Project Material | 65 pages | 4,663 engagements |

25. PREPARATION OF SOAP USING DIFFERENT TYPES OF OILS AND EXPLORING IT'S PROPERTIES

» ABSTRACT Soaps are the sodium salts or potassium salts of stearic acids or any other fatty acids. They are prepared by the saponification process, which is, reacting the oil which contain triglycerides with caustic soda (NaOH) to give the soap. However different oils have different composition of fatty acids which are responsible for different properties of soaps made out of them. In the presen...Continue Reading »

Item Type: Project Material | 65 pages | 20,511 engagements |

What's your project topic?

Chemical Engineering Project Topics & Research Materials | Final Year Research Project Topics With Free Chapter One