Home » Science And Engineering » STRENGTH AND FRACTURE OF EARTH-BASED AND NATURAL FIBER-REINFORCED COMPOSITES
STRENGTH AND FRACTURE OF EARTH-BASED AND NATURAL FIBER-REINFORCED COMPOSITES
Sold By: Joe Project Store | Item Type: Project Material | Report this? | Attributes: 50 pages | 1-5 chapters | Amount: ₦5,000 | Marked useful: 5,901 times
Delivery: Within 24 hoursABSTRACT
This study examined the mechanical properties of earth-based materials that are relevant to the future development of affordable housing. Earthcrete structures were produced by mixing various proportions of laterites, clay and cement, while natural fibre-reinforced composites were produced by mixing earth-based matrices with natural fibre (Straw). Mechanical testing showed that optimum performance of the various samples was obtained at a fibre content of 20% by volume, with compressive strength values of about 2.91 MPa, flexural strength values of about 34.4 MPa and fracture toughness in the range of 1.40 – 1.50 MPa . The results indicate that the mechanical performance of the composites being studied is in line with those in prior studies on natural fiber-reinforced cementious matrix composites.
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND
In our society today, the choice of materials for building is greatly influenced by the cost, properties (mechanical and chemical) and availability. Industrialized societies have developed various materials which are applied in all works of construction (including buildings). Unfortunately, developing countries such as Nigeria where alternative materials exist have failed to explore such opportunities even when there is the possibility of producing such, locally. There is therefore, a need to explore new ways of producing robust building materials from locally available materials.
Such needs have stimulated recent efforts to develop affordable building materials that are strengthened and toughened by locally available natural fibers (Savastano et al., 2003) and matrix materials that are available in developing countries. However, in most cases, the matrix materials utilize cement, which is a relatively expensive synthetic material that emits ~ 14% of the CO2 emissions that are thought to contribute to global warming.
In contrast, earth-based materials are readily available materials that could be used as matrix material in building composites. They can also be stabilized by the use of binders, such as dung or cement, to produce materials that are strong and tough enough for applications in buildings. They can also be reinforced with natural fibers (such as sisal and straw) or industrial wastes (saw dust), while the matrices can be optimized by the use of industrial wastes, such as blast furnace slag and crushed charcoal from the burning of wood.
1.2 PROBLEM STATEMENT
There has been great progress in both the production and application of reinforced materials (except little for earth-based materials). In most cases where high strength and toughness of earth-based materials are required, the materials are stabilized with cement or dung (John, 2001). Some local people have also used straw and other natural fibers to strengthen earth-based materials that are used in local construction of earthen homes.
However, the scientific and engineering bases for such application are very limited. There is, therefore, a need to develop the scientific understanding that can provide the necessary basis for the design of novel earth-based materials that can be used in rural and urban construction.
Tags: Strength and fracture Natural fiber-reinforced composites Importance of fiber-reinforced composites Impact of strength and fracture Maintenance of natural fiber-reinforced composites
This material content is developed to serve as a GUIDE for students to conduct academic research
Delivery: Within 24 hours
Advertise Here
Not what you were looking for? Perform a search
What's your project topic?
Comment on Facebook:
Related Project Materials
- 1.
ADSORPTION OF DISSOLVED IONS IN MINE WASTEWATER WITH LATERITE AND IRON OXIDE NANOPARTICLES
ABSTRACT This work studies the adsorption capacity of laterite and iron oxide nanoparticles for dissolved ions in solution and therefore its abi...More »
Item Type: Project Material | 50 pages | 6,002 engagements |
- 2.
BIOSYNTHESIS OF MAGNETIC NANOPARTICLES FOR CANCER DETECTION AND TREATMENT
ABSTRACT Chemical and physical methods for the synthesis of magnetic nanoparticles for cancer detection and treatment often involve toxic chemicals...More »
Item Type: Project Material | 50 pages | 6,293 engagements |
- 3.
CELL SURFACE INTERACTION ON A MULTI - SCALE
ABSTRACT The increasing rate of cancer patients worldwide, and especially Africa has led to numerous efforts to battle it. One approach to this ...More »
Item Type: Project Material | 50 pages | 5,875 engagements |
- 4.
CLAY FILTRATION OF MICROBES AND FLUORIDE
ABSTRACT Consumption of contaminated water may result in several water borne diseases, including hepatitis, typhoid, cholera, dysentery and o...More »
Item Type: Project Material | 50 pages | 6,057 engagements |
- 5.
FABRICATION OF BIODEGRADABLE IMPLANTABLE DEVICES FOR SUSTAINED LOCALIZED DRUG RELEASE
ABSTRACT This thesis is focused on fabrication of biodegradable implantable devices for extended localized drug release. Paclitaxel (PT) was ...More »
Item Type: Project Material | 50 pages | 5,554 engagements |
- 6.
GOLD NANOPARTICLE FOR MEDICINE
ABSTRACT Gold nanoparticles were synthesized by reducing aqueous chloroauric acid (HAuCl4) with three different bacteria. Various microorganisms we...More »
Item Type: Project Material | 50 pages | 5,815 engagements |